OFFSHORE
- Simulation and analysis of fixed offshore structures
- Simulation and analysis of floating offshore structures
- Structural verifications and code checks
- Revamping of existing fixed offshore structures based on stochastic fatigue approach
- Simulation and analysis of pressure vessels and pressure components
- Dimensional and structural optimization of floating production system hulls
- Vessel and pipeline dynamic motion analyses for S-laying or J-laying pipeline configurations
SIMULATION AND OPTIMIZATION
OF AUXILIARY BUOYANCY TANKS
FOR LARGE JACKET
Tanks are "framed" structures which are connected to the jacket in order to guarantee the required buoyancy during the jacket launching stage, as well as the subsequent self up-ending and floating phases ...
STRUCTURAL ANALYSIS OF A PIPELINE LAYING VESSEL'S RAMP
Structural analysis of the Castoro 6 pipeline lay vessel's external ramp lay for the as-built (damage d) geometry and for the strengthened geometric solutions at the regions of higher stress ...
STRUCTURAL ANALYSIS OF AN FPSO MOORING CONNECTOR
The system is a Multibore Quick Connect / Disconnect Coupler, which provides a simultaneous connection of pressure lines (risers) while guaranteeing the "structural" connection between the FPSO and its mooring lines ...
FINITE ELEMENT ANALYSIS OF A STINGER FOR PIPELINE J-LAY IN DEEP WATER
Structural assessment of a Stinger for pipeline J-lay at different sea state loading conditions, utilizing finite element analysis and hydrodynamic analysis, in compliance with proper rules governing over the structural checks of offshore structures ....
STRUCTURAL ANALYSIS OF AN LNG CARRIER MOORING AND
OFFLOADING CONNECTOR
easibility study of a system based on the principle of Multibore Quick Connect/Disconnect Coupler, that, besides the connections of pressure lines, guarantees the "structural" connection between LNG and loading arm ....
STRESS ANALYSIS OF A BALL VALVE DURING PIPELINE LAY
Structural integrity assessment of valve-body and of valve-to-pipeline interface sections. The only reliable way to establish proper confidence over the valve structural behavior was the performing of analysis by means of dedicated finite element model ....
STRESS ANALYSIS FOR CLAPPER
IMPACT EFFECTS
Fluid-dynamics study and structural integrity assessment of shutoff valve body under impact load due to valve clap drop. The only reliable way to establish proper confidence over the valve structural behavior was the performing of analysis by means of dedicated finite element model ....
BEND STIFFENERS
Study of structural behavior due to static loads in bend stiffeners .....
COLD BENDING OF THERMALLY INSULATED PIPES
The project aims to determine the main parameters responsible by damage to duct bent cold .....
STRESS ANALYSIS OF RISER CONTROL PIPES
The primary objective of this project was to characterize the response of the Filler/control duct assembly when bent around a rigid tool .....
© All rights reserved | ESSS North America Inc.